JIANGSU JIUJIUJIAYI ULTRASONIC TECHNOLOGY CO.,LTD

In our life now use the advantages of ultrasonic automatic company has numerous, scope of application is becoming more and more widely, of course in the use of ultrasonic automatic washing machine still have a lot of demand, we're here to specific about it.
It is forbidden to open fire into the ultrasonic cleaning machine work shop, to regular inspection on the line to prevent electric spark, employees working for the advantages of ultrasonic automatic operation increased awareness of safety training, ultrasonic automatic washing machine is must have grounding device, however because ultrasonic automatic washing machine is a metal and can conduct electricity, so you need to satisfy the three conditions:
1. Need incendivity material existence.
2. Need to the existence of the ignition source.
3. When burning need to have the presence of oxygen. In the ultrasonic cleaning machine workshop to complete these elements can prevent accidents.
The end of this article we'll remind those ultrasonic automatic washing machine operator must wear anti-static overalls, in order to achieve a protective role, enables us to security, peace of mind to work.
There are the following considerations:
1. Use the equipment specification to power supply and power cord, must be installed in the power supply circuit is dedicated to the advantages of air switch to cut when in need of cleaning machine power supply.
2. The equipment according to safety requirements well grounded line;
3. The cleaner should be placed in a clean, dry and strong corrosive gas environment, and to avoid violent vibration.
4. The generator should leave enough heat dissipation space on the back.
5. Make sure that the machine has good contacts, to avoid the personal injury accidents.
6. Washing machine at work, do not put your fingers into cleaning fluid.
7. It is strictly prohibited to no-load condition boot, must use the instructions before starting the add cleaning fluid into the cleaning tank of liquid level.
8. Content may not contact with the bottom of the channel to be cleaned, suggested that the workpiece cleaning in the basket.
9. Not strong acid or alkaline cleaning fluid, is to rely on security measures, cannot use flammable solution.
10. The cleaning fluid temperature rise along with the continuous working time, cleaning machine continuous work time not more than eight hours.
11. If discover to there is leakage phenomenon, cleaning tank should be used immediately shut down, empty and contact the seller after cleaning fluid.
12. Not allowed to open the machine without authorization.
13. For cleaning machine with heating device in after cleaning, turn off the heater to be empty again after cleaning fluid cooling cleaning fluid.
14. The equipment USES incombustible detergent, the use of the equipment in must ensure away from flammable and explosive occasions, special circumstances must adopt certain substances, the corresponding safety protection measures.
15. When using must ensure that inject enough clean water in tank.
16. Electrical control box and related electrical components such as don't splash into the water, and away from steam, corrosive gas and dust.
17. Please do not open the cabinet at work, in order to avoid under the condition of unprotected homework;
18. The equipment need not when, for a long time, please release fluid to clean, dry inside groove and the surface after use film to protect.